(02) 6571 3703 Request a Quote
Menu
Australian owned and operated
Safe. Efficient. Reliable.
Attachments TED Attachments Side Shift
Side Shift
Back to Attachments

Side Shift

PART NO. TED-ATT-035-00

The Side Shift module attaches to the turntable and allows operators to mount various other component specific attachments onto it. The module can be manually adjusted +/- 50mm (2inch) sideways allowing operators greater control when lining up components during installation.

Safe Working Load: 800kg / 1,760lbs
Attachment Type: Turntable
Tare Weight: 25kg / 56lbs
Dimensions: (LxWxH)
565 x 335/380 x 70mm
22.3 x 13.2/15 x 2.8inch
Part No: TED-ATT-035-00

Used on
All Makes, Caterpillar, Hitachi, Komatsu, Liebherr Ultra Class
Interested in these products?
Request a Quote
Like this Product?
Share with your friends

Other attachments

TED-ATT-041-00
Slope Jig

Slope Jig

The Slope Jig was designed to primarily be used with the Universal Mounting Plate to allow operators to undertake tasks where the intended job is at an angle. Component specific attachments can also be bolted directly onto the Slope Jig. The Slope Jig can support loads of up to 800kg (1,760lbs) and can be manually adjusted to achieve angles from 0 to 45 degrees.
TED-ATT-002-01
Dozer Blade

Dozer Blade

The Dozer Blade comes standard with every TED and is primarily used to clear a level working area allowing for a stabler and therefore safer operation. When the blade is fitted in the bottom mounting port it will just touch the ground when TED is fully compressed, perfect pushing debris off concrete floors.
TED-ATT-030-00
Low Profile Pivot Table

Low Profile Pivot Table

The LPPT is the perfect for supporting components on an angle and works in conjunction with other turntable mounting attachments such as the Sump Tray and Cutting Edge Attachments. The LPPT is capable of fine adjustment +/- 15 degrees and provides fitters with superior flexibility and control.
TED-ACC-003-00
TED’s Home

TED’s Home

Keep TED and attachments neatly stored away in TED’s Home. TED’s Home has tie down points and forklift guides to allow users to transport the whole system if required. The attachment storage system allows easy access and secure fixing points for multiple TED attachments. There is a upper shelf where users can store attachments and a hanging frame for turntable mounted attachments.
TED-ATT-028-00
Sound Suppression Tray

Sound Suppression Tray

The Sound Suppression Tray has been specifically designed to assist in the removal and installation of sound suppression panels.
TED-ATT-025-00
Strut Spindle Cap Tool

Strut Spindle Cap Tool

Strut Spindle Caps of various sizes can be safely removed and replaced using the SSCT. The three (3) threaded bolts offer width and angle adjustment to accommodate varying strut spindle caps. The SSCT is designed to take the weight of the strut spindle cap and removal tool only. The strut itself must be supported as per manufacturers specifications.
TED-ATT-014-00
Sump Tray

Sump Tray

The Sump Tray is used primarily with either the Low Profile Pivot Table or Slope Jig to alter the table angle and can be used as either a flat tray or with a 45mm (1.8inch) edge around the frame.
TED-ATT-003-01
Stand Locating Tool

Stand Locating Tool

Manoeuvre heavy axle stands under machinery with remote control ease. The Stand Locating Tool helps to protect against needless back and shoulder strains.
TED-ATT-044-00
Brake/Steer Pump

Brake/Steer Pump

The Brake/Steer Pump Tool can be manually pivoted +/- 5 degrees to allow for spline alignment and incorporates an interchangeable pump mounting weldment allowing operators to use the tool for various pumps.
Back to Attachments
Home
Equipment
Attachments
Support
Contact Us
Find a Distributor
Back
Equipment
TED™
LA40
Big TED™
About
Media

Opening hours

Monday - Friday
8am to 4pm

Saturday - Sunday
Closed

Connect

(02) 6571 3703 Request a Quote