+61 418 517 359 Request a Quote
Menu
Australian owned and operated
Safe. Efficient. Reliable.
Attachments TED Attachments Double Sided Cutting Edge Tool
Back to Attachments

Double Sided Cutting Edge Tool

PART NO. TED-ATT-020-00

The Double Sided Cutting Edge Tool is designed to aid in routine CET maintenance, the Double Sided Cutting Edge Tool allows operators to remove, clean, turned and reinstall the CET. The Double Sided Cutting Edge Tool can be mounted onto any of the movement modules
for greater alignment of components.

Safe Working Load: 800kg / 1,760lbs
Attachment Type: Turntable
Tare Weight: 40kg / 89lbs
Dimensions: (LxWxH)
570 x 450 x 160mm
22.4 x 17.7 x 6.3inch
Part No: TED-ATT-020-00

Used on
All Makes, Caterpillar, Hitachi, Komatsu
Interested in these products?
Request a Quote
Like this Product?
Share with your friends

Other attachments

TED-ATT-041-00

Slope Jig

The Slope Jig was designed to primarily be used with the Universal Mounting Plate to allow operators to undertake tasks where the intended job is at an angle. Component specific attachments can also be bolted directly onto the Slope Jig. The Slope Jig can support loads of up to 800kg (1,760lbs) and can be manually adjusted to achieve angles from 0 to 45 degrees.
TED-ATT-043-00

Steering Arm

The Steering Arm Tool has been specifically designed to assist in the removal and installation of the Komatsu 930E Steering Arm. Due to the weight of the attachment, it has been designed to be forkliftable even when carrying a steering arm.
TED-ATT-035-00

Side Shift

The Side Shift module attaches to the turntable and allows operators to mount various other component specific attachments onto it. The module can be manually adjusted +/- 50mm (2inch) sideways allowing operators greater control when lining up components during installation.
TED-ATT-031-00

Front Jib Attachment

Manoeuvre awkward objects from above with the all purpose Front Jib Attachment. Three different extension lengths add to the versatility of the Front Jib Attachment.
TED-ATT-021-00

Grader Cutting Edge

The Grader Cutting Edge Tool can be utilised to take the weight of the CET from a variety of graders. The attachment is fitted with two (2) adjustment bolts which can be tightened to assist in stabilising the CET during transit and installation. When used by itself the Grader Cutting Edge has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).
TED-ATT-028-00

Sound Suppression Tray

The Sound Suppression Tray has been specifically designed to assist in the removal and installation of sound suppression panels.
TED-ATT-006-01

Cutting Edge Tool

The Cutting Edge Tool is used to lower manual handling on CET maintenance. Rest the CET due for removal in the Cutting Edge Tool and lift or lower into place via TED’s remote control operation. The Cutting Edge Tool can be mounted onto any of the adaptor modules for greater alignment of components.
TED-ATT-002-01

Dozer Blade

The Dozer Blade comes standard with every TED and is primarily used to clear a level working area allowing for a stabler and therefore safer operation. When the blade is fitted in the bottom mounting port it will just touch the ground when TED is fully compressed, perfect pushing debris off concrete floors.
TED-ATT-010-00

Track Roller Carrier

The Track Roller Carrier’s intended purpose is to aid in the removal and replacement of track rollers, lowering the manual handling component and removing the need for placing hands in harm’s way. When used by itself the Track Roller Carrier has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).
Back to Attachments
Home
Equipment
Attachments
Support
Contact Us
Find a Distributor
Back
Equipment
TED™
LA40
Big TED™
About
Media

Opening hours

Monday - Friday
8am to 4pm

Saturday - Sunday
Closed

Connect

+61 418 517 359 Request a Quote