+61 418 517 359 Request a Quote
Menu
Australian owned and operated
Safe. Efficient. Reliable.
Attachments TED Attachments Forward Shift
Back to Attachments

Forward Shift

PART NO. TED-ATT-032-00

The Forward Shift module attaches to the turntable and allows operators to mount various other component specific attachments onto it.
The module can be manually adjusted +/- 40mm (1.6inch) forwards or rearwards allowing operators greater control when lining up components during installation.

Safe Working Load: 800kg / 1,760lbs
Attachment Type: Turntable
Tare Weight: 24kg / 53lbs
Dimensions: (LxWxH)
565/650 x 335 x 70mm
22.3/25.6 x 13.2 x 2.8inch
Part No: TED-ATT-032-00

Used on
All Makes, Caterpillar, Hitachi, Komatsu, Liebherr Ultra Class
Interested in these products?
Request a Quote
Like this Product?
Share with your friends

Other attachments

TED-ATT-002-01

Dozer Blade

The Dozer Blade comes standard with every TED and is primarily used to clear a level working area allowing for a stabler and therefore safer operation. When the blade is fitted in the bottom mounting port it will just touch the ground when TED is fully compressed, perfect pushing debris off concrete floors.
TED-ATT-028-00

Sound Suppression Tray

The Sound Suppression Tray has been specifically designed to assist in the removal and installation of sound suppression panels.
TED-ATT-010-00

Track Roller Carrier

The Track Roller Carrier’s intended purpose is to aid in the removal and replacement of track rollers, lowering the manual handling component and removing the need for placing hands in harm’s way. When used by itself the Track Roller Carrier has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).
TED-ATT-025-00

Strut Spindle Cap Tool

Strut Spindle Caps of various sizes can be safely removed and replaced using the SSCT. The three (3) threaded bolts offer width and angle adjustment to accommodate varying strut spindle caps. The SSCT is designed to take the weight of the strut spindle cap and removal tool only. The strut itself must be supported as per manufacturers specifications.
TED-ATT-033-00

Elevated Table

The Elevated Table provides operators with an additional 600mm (23.6inch) of reach whilst not compromising stability. The Elevated Table has its own built in turntable which other attachments can be bolted onto.
TED-ATT-016-00

Tyre Handler

Our user friendly Tyre Handler is perfect for taking the weight out of changing tyres on service vehicles. Adjustable arms to fit a variety of tyre sizes, and rollers for ease of lining up wheel studs with the tyres make for simple efficient one person tyre changes. Lower manual handling and raise efficiency with the TED Tyre Handler. The Tyre Handler can be lowered and positioned under the new tyre all via TED’s remote control operation to minimise manual handling.
TED-ATT-035-00

Side Shift

The Side Shift module attaches to the turntable and allows operators to mount various other component specific attachments onto it. The module can be manually adjusted +/- 50mm (2inch) sideways allowing operators greater control when lining up components during installation.
TED-ATT-041-00

Slope Jig

The Slope Jig was designed to primarily be used with the Universal Mounting Plate to allow operators to undertake tasks where the intended job is at an angle. Component specific attachments can also be bolted directly onto the Slope Jig. The Slope Jig can support loads of up to 800kg (1,760lbs) and can be manually adjusted to achieve angles from 0 to 45 degrees.
TED-ATT-024-00

Corner Cutting Edge Tool

The CCET is fully adjustable making it perfect for corner CET. Operators can adjust the support pins in any combination of holes to achieve and angle of up to +/- 10 degrees. The CCET also has two retaining bolts which can be used to support different CET thicknesses. The CCET works best when combined with the Low Profile Pivot Table allowing it to be aligned with the angle of the CET being removed/installed.
Back to Attachments
Home
Equipment
Attachments
Support
Contact Us
Find a Distributor
Back
Equipment
TED™
LA40
Big TED™
About
Media

Opening hours

Monday - Friday
8am to 4pm

Saturday - Sunday
Closed

Connect

+61 418 517 359 Request a Quote