(02) 6571 3703 Request a Quote
Menu
Australian owned and operated
Safe. Efficient. Reliable.
Attachments TED Attachments Sump Tray
Sump Tray
Sump Tray - Image 2
Back to Attachments

Sump Tray

PART NO. TED-ATT-014-00

The Sump Tray is used primarily with either the Low Profile Pivot Table or Slope Jig to alter the table angle and can be used as either a flat tray or with a 45mm (1.8inch) edge around the frame.

Safe Working Load: 200kg / 440lbs
Attachment Type: Turntable
Tare Weight: 36kg / 80lbs
Dimensions: (LxWxH)
122 x 62 x 50mm
4.8 x 2.4 x 2inch
Part No: TED-ATT-014-00

Used on
All Makes, Caterpillar, Hitachi, Komatsu, Liebherr Ultra Class
Interested in these products?
Request a Quote
Like this Product?
Share with your friends

Other attachments

TED-ATT-016-00
Tyre Handler

Tyre Handler

Our user friendly Tyre Handler is perfect for taking the weight out of changing tyres on service vehicles. Adjustable arms to fit a variety of tyre sizes, and rollers for ease of lining up wheel studs with the tyres make for simple efficient one person tyre changes. Lower manual handling and raise efficiency with the TED Tyre Handler. The Tyre Handler can be lowered and positioned under the new tyre all via TED’s remote control operation to minimise manual handling.
TED-ATT-043-00
Steering Arm

Steering Arm

The Steering Arm Tool has been specifically designed to assist in the removal and installation of the Komatsu 930E Steering Arm. Due to the weight of the attachment, it has been designed to be forkliftable even when carrying a steering arm.
TED-ATT-031-00
Front Jib Attachment

Front Jib Attachment

Manoeuvre awkward objects from above with the all purpose Front Jib Attachment. Three different extension lengths add to the versatility of the Front Jib Attachment.
TED-ATT-032-00
Forward Shift

Forward Shift

The Forward Shift module attaches to the turntable and allows operators to mount various other component specific attachments onto it. The module can be manually adjusted +/- 40mm (1.6inch) forwards or rearwards allowing operators greater control when lining up components during installation.
TED-ATT-020-00
Double Sided Cutting Edge Tool

Double Sided Cutting Edge Tool

The Double Sided Cutting Edge Tool is designed to aid in routine CET maintenance, the Double Sided Cutting Edge Tool allows operators to remove, clean, turned and reinstall the CET. The Double Sided Cutting Edge Tool can be mounted onto any of the movement modules for greater alignment of components.
TED-ATT-010-00
Track Roller Carrier

Track Roller Carrier

The Track Roller Carrier’s intended purpose is to aid in the removal and replacement of track rollers, lowering the manual handling component and removing the need for placing hands in harm’s way. When used by itself the Track Roller Carrier has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).
TED-ATT-041-00
Slope Jig

Slope Jig

The Slope Jig was designed to primarily be used with the Universal Mounting Plate to allow operators to undertake tasks where the intended job is at an angle. Component specific attachments can also be bolted directly onto the Slope Jig. The Slope Jig can support loads of up to 800kg (1,760lbs) and can be manually adjusted to achieve angles from 0 to 45 degrees.
TED-ATT-038-00
Universal Mounting System

Universal Mounting System

The Universal Mounting System was designed to allow operators to arrange different types of support frames in a multitude of configurations depending on the task they wish to perform. The Universal Mounting Plate has a series of M12 screw points laid out in a 6x9 grid at 75mm (3inch) spacing, allowing operators to fix the brackets on either orientation. The support frames can be combined with tie down points (e.g. M12 eyebolt) to effectively support and secure all sorts of different shaped loads.
TED-ATT-024-00
Corner Cutting Edge Tool

Corner Cutting Edge Tool

The CCET is fully adjustable making it perfect for corner CET. Operators can adjust the support pins in any combination of holes to achieve and angle of up to +/- 10 degrees. The CCET also has two retaining bolts which can be used to support different CET thicknesses. The CCET works best when combined with the Low Profile Pivot Table allowing it to be aligned with the angle of the CET being removed/installed.
Back to Attachments
Home
Equipment
Attachments
Support
Contact Us
Find a Distributor
Back
Equipment
TED™
LA40
Big TED™
About
Media

Opening hours

Monday - Friday
8am to 4pm

Saturday - Sunday
Closed

Connect

(02) 6571 3703 Request a Quote