+61 418 517 359 Request a Quote

Australian owned and operated

Safe. Efficient. Reliable.

AS1170.1:2002

AS1170.1:2002

Belly Plate Stand (4 legs)

Simple yet effective, this set of 4 sturdy legs will support the load of a belly plate up to 800kg, making TED available to continue with other jobs. These are perfect for the field where there is no access to forklifts and cranes. Used in the workshop these stands will save time and personnel waiting for a free forklift and operator.

Corner Cutting Edge Tool

The CCET is fully adjustable making it perfect for corner CET. Operators can adjust the support pins in any combination of holes to achieve and angle of up to +/- 10 degrees. The CCET also has two retaining bolts which can be used to support different CET thicknesses. The CCET works best when combined with the Low Profile Pivot Table allowing it to be aligned with the angle of the CET being removed/installed.

Counter Balance

The Counter Balance is designed to be mounted onto the back of the table therefore increasing the lifting capacity of the front attachments. The Counter Balance comes with removable legs allowing for quick mounting and removal.

Fork Tynes

The Fork Tynes attach to the front of TED, can carry 200kg without the additional Counter Balance, or 400kg with the Counter Balance secured. Move heavy equipment and components around in tight low spaces with ease using TED’s width adjustable Fork Tynes.

Front Belly Plate Cradle

The Front Belly Plate Cradle is designed to support the Front Belly Plate of D-11 dozers at the right angle for safe removal and transportation. The raised platform provides additional stability for the belly plate by holding it horizontal and allows it to be rotated on the turntable which allows it to be maneuvered between the ripper tine and the tracks.

Grader Cutting Edge

The Grader Cutting Edge Tool can be utilised to take the weight of the CET from a variety of graders. The attachment is fitted with two (2) adjustment bolts which can be tightened to assist in stabilising the CET during transit and installation. When used by itself the Grader Cutting Edge has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).

Low Profile Pivot Table

The LPPT is the perfect for supporting components on an angle and works in conjunction with other turntable mounting attachments such as the Sump Tray and Cutting Edge Attachments. The LPPT is capable of fine adjustment +/- 15 degrees and provides fitters with superior flexibility and control.

Track Roller Carrier

The Track Roller Carrier’s intended purpose is to aid in the removal and replacement of track rollers, lowering the manual handling component and removing the need for placing hands in harm’s way. When used by itself the Track Roller Carrier has a SWL of 200kg (440lbs), however if used with the TED Counter Balance the SWL can be increased to 400kg (880lbs).

Tyre Handler

Our user friendly Tyre Handler is perfect for taking the weight out of changing tyres on service vehicles. Adjustable arms to fit a variety of tyre sizes, and rollers for ease of lining up wheel studs with the tyres make for simple efficient one person tyre changes. Lower manual handling and raise efficiency with the TED Tyre Handler. The Tyre Handler can be lowered and positioned under the new tyre all via TED’s remote control operation to minimise manual handling.

Back

Equipment

+61 418 517 359 Request a Quote